Cheap Replica Watches Online Sale UK


IWC’s first monopusher goes to the movies, and then under the hammer

Replica-IWC-Portofino-Tribeca-MonopusherNew York’s Tribeca Film Festival kicks off next week – and for the third year in a row, IWC Schaffhausen has a starring role as the Official ‘Festival-Time’ Partner.

To mark the partnership, the luxury Swiss replica watches brand has created its first ever monopusher chronograph (defined by a single pusher – built into the crown in this case – that starts, stops and resets the chronograph). It’s called the Portofino Monopusher Edition ‘TRIBECA FILM FESTIVAL 2015’ Unique Piece, and it has two Bordeaux red subdials on its slate-coloured dial, mimicking movie-land red carpets.

This one-off watch is being sold by Christie’s in an online auction that ends today – all proceeds will go to the non-profit Tribeca Film Institute.

Replica-IWC-Portofino-Tribeca-8-DaysIWC has also produced a limited run of 100 Portofino Hand-Wound Eight Days pieces, which will only be available in the USA.

Blancpain’s deep commitment

Replica-Blancpain-Ocean-Commitment-Pristine-SeasA recent expedition supported by Swiss luxury replica watches brand Blancpain is to lead to the creation of the world’s largest, continuous marine reserve around the Pitcairn Islands, a Pacific territory owned by the United Kingdom.

Part of National Geographic’s Pristine Seas Expeditions, the recent expedition was also the latest in a growing line of Blancpain-supported marine conservation projects, which the brand refers to as its Ocean Commitment.

The new Breitling replica marine reserve will span an area of more than 322,000 square miles –more than three and a half times the size of the British Isles – around the Pitcairn Islands, which were originally settled by mutineers from the HMS Bounty in 1790 and make up one of the last British overseas territories.

The first Blancpain-backed Pristine Seas expedition to the area took place in March 2012 when National Geographic Explorer-in-Residence, Dr Enric Sala and his team discovered several new species of fish and marine ecosystems. It was these findings that formed the scientific basis for the creation of the reserve.

Blancpain replicaTo commemorate this and its other conservation projects, Blancpain unveiled the Fifty Fathoms Ocean Commitment Bathyscaphe Chronographe Flyback in October last year. It’s a limited edition piece, with a 43mm grey ceramic case and one of Blancpain’s in-house chronograph movements. Its dial and bezel inlay are a deep, marine-like blue. Blancpain will donate €1,000 from each of the 250 pieces sold to its on-going conservation projects.

A Swatch in time

Swatch-Keith-HaringAn auction in Hong Kong this week offered rare proof you don’t have to invest in high-end Breitling replica watches brands to build a collection worth millions. On Wednesday, The Dunkel Collection, a ‘superlot’ made entirely of colourful Swatch watches and memorabilia, went under the hammer for a cool $6m.

Previously, it belonged to Paul Dunkel, who built his treasure trove over 25 years, collecting some 5,800 watches, making it one of the world’s largest collections of Swatches held in private hands. It included all manner of prototypes and limited editions, many of them from the Swatch Art line of special editions, watches made in collaboration with iconic 20th century artists, among them Keith Haring, Kiki Picasso and Mimmo Rotella. One of the highlights was the Bond villain boxed set launched in 2008, a line of 20 watches released in a limited series of 222.

Swatch-Bond-Villain-SetSwatch may be a mass brand, but its story is entwined with the rebirth of the Swiss luxury watch industry. It was launched in 1983 by the late Nicholas Hayek, whose vision was of a cheap, fashionable ‘second watch’ – hence ‘Swatch’ – made of plastic and powered by basic but reliable quartz movements. Hayek’s watches captured the zeitgeist and democratized Swiss watchmaking, and by 1988 he’d sold more than 50 million Swatches, making him a fortune he used to buy up and revive flagging traditional Swiss replica watch brands such as Omega, Breitling replica and Longines, now the flagship names of what trades today as Swatch Group. Without Swatch, it’s almost certain those brands would have disappeared into the history books.

Comparative Review Replica Breitling Chronomat B01 vs. IWC Ingenieur Chronograph

A replica watch with an in-house chronograph movement is something quite special. Until recently, even some well-established brands did not offer their own factory-built movement with a stopwatch function. It’s no wonder such movements are rare: a chronograph is a huge complication whose implementation requires enormous care and attention. For the longest time replica sports-watch brands like IWC and Breitling didn’t produce their own chronograph movements, either. But things have recently changed at these two companies: at the 2009 Baselworld watch fair, Breitling introduced its long anticipated in-house movement, the B01, and the first and only replica watch model to contain this movement, fittingly named the Chronomat B01. IWC presented its Ingenieur Chronograph at Geneva’s SIHH watch fair in early 2009, with an in-house movement that debuted in 2007 in the company’s Da Vinci chronograph.

Review-Breitling-Chronomat-B01The Replica Breitling Chronomat B01 faithfully follows the Breitling pilot-watch tradition. Its contemporary design includes functional details like a rotating bezel as well as other design elements that are purely decorative. An extreme attention to detail is evident on the dial, whose central element is a square with its edges defined by the center points of the three subdials. The ridged patterns in the subdials change according to which half falls within this square area: outside the square, the pattern is radiating circles; inside, it is vertical ridges. The hour-counter subdial at 6 o’clock is divided into quarters. The hands on the subdials incorporate the square shape, and the quarter-hour markers on the bezel are also square. Even the angular typography of the numerals on the subdials and bezel (with its square “zero”) reinforce this bold style. The three different numeral fonts add interest, but in this case, more restraint would have made a stronger overall statement, and the font style of the numerals on the bezel takes some getting used to. Generally speaking, though, we liked the design of the Chronomat B01 very much.

Review-IWC-Ingenieur-ChronographThe IWC replica watches sale makes an even sturdier overall impression due to its larger diameter. All the numerals are executed in the same type found on other Ingenieur models. The standout features of the gg Ingenieur Chronograph’s dial are the subdials located at the top and bottom, with a silver ridged structure that sets them off from the rest of the black main dial. A geometric pattern fills the inner section of the dial. Luminous coating is applied deep within the grooves of the silver-colored markers, whose shape reflects the elongated hour and minute hands. The Ingenieur case has rectangular pushers that are neatly integrated with the crown guard and bezel.

The Ingenieur is only available with a single dial type and in two case materials (steel or rose gold). The Breitling Chronomat B01 is available with a wide range of different dials, with markers or Roman numerals, in steel or gold (or various combinations), and with a number of different straps and bracelets.

Review-Breitling-Chronomat-B01-vs.-IWC-Ingenieur-ChronographThe time and date are easy to read on the black dial of the cheap Breitling replica watches. However, it’s a bit difficult to read the elapsed minutes and hours on the small subdials with their silver hands. The IWC chalks up double the points in this category. First of all, and rather surprisingly, here the silver hands provide terrific contrast with the silver subdials. Also, the elapsed minutes and hours are cleverly combined on the top subdial with easy-to-read 12-hour and 60-minute divisions, as in a second-time-zone display. The effect is more striking over longer timed periods than shorter ones, and numerals on the hour track would have been helpful. But the sheer size of the dial aids in legibility.

The other side of the coin? The IWC Ingenieur’s 45.5-mm case needs the width of a large wrist as a counterbalance. The watch overwhelms a normal wrist and doesn’t fit snugly. On a steel bracelet, it feels top-heavy and so must be worn tightly to keep it from sliding around. In contrast, the Breitling Chronomat B01 does not appear overly large despite its diameter of 43.5 mm, and it’s also more comfortable to wear. It lies snugly against the wrist, thanks in part to the supple rubber strap and adjustable strap extension integrated into the clasp. The Breitling clasp has a two-button deployment system that is attractive, easy to use and nicely finished. The rubber strap appears quite plain in comparison; luckily, the Chronomat also comes with a crocodile or calfskin strap or a metal bracelet.

The IWC Ingenieur Chronograph is also available with a crocodile strap or a stainless-steel bracelet. The bracelet can be adjusted without a screwdriver, and the single-button deployant clasp is surprisingly flat. However, the two hinged parts of the clasp are made of thin metal and shouldn’t be subjected to excess pressure when open. Both bracelet and clasp boast superb finishing: the bracelet’s carefully beveled and polished edges highlight the line finish on all other surfaces, perfectly matching the extraordinarily fine finishing on the replica watches uk case.

Breitling-Chronomat-B01-vs.-IWC-Ingenieur-ChronographThe IWC Ingenieur’s two large pushers are easy to use. The screw-down crown is also large enough to easily grasp and turn. The hack mechanism and quick date adjustment simplify the accurate setting of the time and date.

Breitling’s watch also includes both of these useful features. In contrast to the Valjoux 7750, these two manufacture movements allow the date to be changed right before 12 o’clock without running the risk of damaging the movement. The fluted crown on the Breitling Chronomat is easy to grasp and turn, and the pushers are also screwed. Although this makes using the chronograph function somewhat more awkward, it does provide greater protection for the pushers and increases the water-resistance of the watch to 500 meters. Unfortunately, you’ll have to press the button rather firmly to start the chronograph, due to the design of the chronograph levers. The Chronomat’s unidirectional rotating bezel has 240 ratchets and turns smoothly but should be easier to grasp.

Interestingly, the dimensions of the two movements vary only slightly. Each has an impressively long power reserve of more than three days. Plus, both movements are equipped with a bidirectional winding system and have an elegant column-wheel mechanism. But if you examine the movements (and you’ll have to remove the caseback from the Breitling to do this) the differences are immediately clear. While IWC uses the same automatic shock-protection rotor bridge as in its Ingenieur movement 80111, the Breitling appears somewhat more conventional. Breitling wins points with a patented self-centering system for the zero position resetting hammers, a calendar with an instantly advancing date, and especially for the modern vertical clutch that prevents the chronograph seconds hand from jumping when it starts. Breitling added a shock-absorbing escape wheel to make the Breitling replica watch more resistant to impacts. Another bonus: the movement includes an index-assembly that allows the wearer to quickly and easily adjust the watch’s rate to his or her preferred speed. Breitling also produces its mainplates and bridges in-house, and sets its own jewels as well.

Breitling-Chronomat-B01For the 89360 caliber, IWC developed a new double-pawl winding system based on its standard Pellaton winding system. With two double-pawl winders, it doubles the number of pawls that push and pull to wind the mainspring. They are no longer controlled with a cam but by a crank similar to the type used in automobiles. The pawls are arranged to apply winding torque even at the slightest motion of the rotor. This winding system is said to be 30 percent more efficient than its predecessor, making it possible to reduce the weight of the rotor and thereby reduce wear. The movement features a free-sprung oscillating system, a sign of high quality. Plus, the flyback function in the IWC Ingenieur Chronograph (not featured in the name of the model, as is usually the case) requires a great deal of time and effort in the design stage. The minute counter does not jump, but advances slowly. Unfortunately, the date disk moves slowly, too, and begins visibly advancing at 11 o’clock.

The two movements are similar in their degree of decoration, with various finishes, perlage on the mainplate and polished screw heads. The cutouts on the IWC rotor provide a nice view of the movement, but few edges show beveling or polishing. Like the Valjoux 7750, IWC’s movement uses a rocking pinion for its chronograph clutch. This solution was developed in order to simplify the chronograph but has proven to be essential. The axis of the pinion is moved only on one side and causes the wheels to engage. IWC has created a special shape for the 240 teeth on the chrono-runner in order to minimize jumping of the chronograph seconds hand. Both copy watches contain stamped and polished levers, which remind us of those on the Valjoux 7750. Machined levers would have been better choices. Both movements therefore show a mixed bag of features, combining high-quality components with parts one usually finds in lower-grade movements.

IWC-Ingenieur-ChronographThis combination of different grade components has no negative effect on the rate results at all. Both watches have highly accurate rate results, which one would certainly expect from Breitling with its chronometer certification. The B01, like every Breitling movement, is submitted to COSC, the Swiss regulating authority that issues the certificates, which subjects eeach movement to 15 days of rigorous testing, and each one must conform to the agency’s strict standards. In our test watches the B01 caliber met these standards, with a beat error of no more than five seconds per day between each position and an average deviation of only +0.2 seconds. IWC Caliber 89360 kept up the pace, with an average deviation of +1.3 seconds with the greatest difference only three seconds. Plus, the IWC shows almost these same results when the chronograph is running.

Even though the replica Breitling uk watches run neck and neck in nearly all respects, there is a huge disparity in their prices: The price of the Breitling Chronomat B01 is close to the half of the IWC Ingenieur Chronograph. Even when both watches are equipped with a similar strap or bracelet, the IWC still costs much more than the Breitling. Prospective buyers for whom price is not an issue can decide solely in favor of the design that best suits their personal style.